TY-IR1000

product manual

▲Main parameters

▲The scope of application is
suitable for the rapid drying of solvent-based ink surfaces and the drying of moisture-containing objects; it is widely used in printing, electronics, silica gel, food, chemical and other industries.
▲ Main performance and configuration
1. Box-shaped split design, the length of the whole drying tunnel is 16m, the drying part is divided into 1 section (2m is 1 section), each section is divided into 9 heating tubes, each heating tube The distance is 175mm. The width of the drying tunnel is 1200m, the inlet of the drying tunnel is 0.5m each, and the width of the mesh belt is 1000m. The discharge port is 0.5m
2. The heating tube is installed on the upper part, and they are all installed in parallel.
3. The transmission system adopts frequency conversion speed control transmission technology, Taiwan imported 0.75KW/1:60 gear box frequency conversion motor, and the conveying speed is 0-25m/min. tone.
4, the belt materials imported Teflon mesh belt.
5, the net height of 200mm bake heating zone (heating zone using each piece of fan thermal cycling). each segment is controlled by independent temperature control heating detector control. ± 3 ℃
6. According to the different items to be dried, in order to make the mesh belt can bear the maximum weight, a rolling roller is installed every 300mm.
7. All the heating tubes are ceramic far-infrared lamps made in Taiwan, and the temperature control accuracy is high.

8. The power supply of the drying tunnel is three-phase 380V/50HZ, and the lamp voltage adopts 380V/50HZ.
9. The maximum temperature of the drying tunnel working space cannot be lower than: normal temperature -250℃.
10 Original electrical appliances: temperature controller, button, middle The relays and AC contactors all use imported accessories such as Schneider and Omron.
11. All frame steel materials are national standard materials.